Menu in Datalyse
Measure (t,f(t))
Multitable, measuring on one or more inputs
Multigraph, measuring on both inputs.
Read log
Baud rate 9600, no parity, 1 stop, 8 data bits. Command "V" for version.
Conductivity-meter with temperature measuring for automatic or manual temperature compensation.
Menu in Datalyse
- Measure (t,f(t))
- Read log
Baud rate 9600, no parity, 1 stop, 8 data bits. Version command: "V".
- Wavelength region: 380 - 760 nm
- Intensity range: 0 - 300 kLx
- Accuracy: 1% of full scale
The sensor is calibrated from the factory and offset and factor are printed on the sensor.
If you want to see the calibration values or type new values into the instrument you can do
this by selecting Hold and then the Cal menu and then type in the calibration data.
Menu in Datalyse
Measure (t,f(t))
Multitable, measuring on one or more inputs
Multigraph, measuring on both inputs.
Read log
Baud rate 9600, no parity, 1 stop, 8 data bits. Version command: "V".
Manometer/barometer can measure pressure using 2 different sensors:
The instrument has an internal sensor as well.
The sensors are calibrated from the factory and offset and factor are printed on the sensor. Before measuring with the external sensors the calibration values must be typed into the instrument. This is done by selecting Hold and then the Cal menu and then typing in the calibration data. The sensor in question must be connected to the instrument before you enter the Hold / Cal menu, so that the instrument what data is for which sensor.
The instruments can save 2 sets of calibration data, one set for a 0-1300 sensor and one set for a 500-7000 sensor.
Selecting the unit: mmHg, hPa or psi is done by pressing ON and up arrow simultaneously when the instrument is off. Select the unit by pressing up or down arrow, end by pressing Cal.
Menu in Datalyse
- Measure (t,f(t))
- Multitable, measuring on one or more inputs
- Multigraph, measuring on both inputs.
- Read log
Baud rate 9600, no parity, 1 stop, 8 data bits. Version command: "V".
Measuring range: 0- 200% air saturation or 0 - 30 mg/l O2.
The instrument has automatic temperature and air pressure compensation.
The instrument works like the other in the series, see temperature-meter
Menu in Datalyse
Measure (t, f(t))
Multitable, measuring on one or more inputs
Multigraph, measuring on both inputs.
Read log
Baud rate 9600, no parity, 1 stop, 8 data bits. Command "V" for version.
pH-meter with temperature measuring for automatic or manual temperature compensation.
Menu in Datalyse
Pulse
Read log
Baud rate 9600, no parity, 1 stop, 8 data bits. Command "V" for version.
Menu in Datalyse
Measure (t,f(t))
Multitable, measuring on one or more inputs
Multigraph, measuring on both inputs.
Read log
Baud rate 9600, no parity, 1 stop, 8 data bits. Command "V" for version.
Temperature-meter (differential) measures the temperature using two NiCr-Ni thermo elements while displaying both temperatures or one temperature and the difference.
HOLD, CAL, MODE, SET, AVG, MIN, MAX
The functions and operations are identical for all instruments, but the display is of course different
Select function with Up and Dn.
| Function | Activate function | Setup | OK | Cancel |
| Display t1, t2, t1-t2 | Up / Dn | |||
| CALibration |
Hold, Up, Hold |
Up / Dn Up / Dn |
CAL of t1 CAL of t2 |
OFF |
| MODE LINK | Hold, 2*Up, Hold | Dn | CAL | OFF |
| MODE REMOTE | Hold, 2*Up, Hold | Up | CAL | OFF |
| SET automatic log | Hold, 3*Up, Hold | Up / Dn | CAL | OFF |
| SET manual log | Hold, 3*Up, Hold | CAL | OFF | |
| Manual log | Hold, Hold | |||
| AVG, display | Hold, 3*Dn | OFF (end) | ||
| MINimum, display | Hold, 2*Dn | Up / Dn | CAL | OFF (end) |
| MAXimum, display | Hold, Dn | Up / Dn | CAL | OFF (end) |
| MINimum, bar | Hold, 2*Dn, Hold | Up / Dn | CAL | OFF |
| MAXimum, bar | Hold, Dn, Hold | Up / Dn | CAL | OFF |
The names refer to the front panel of the thermometer:
CAL should be OK. Hold should be MENU.
Cancel should be OFF or ESC. In the manual Hold is used for cancel, but OFF works the same way.